-
NAISIL POLIMERO is a mono-component, low-modulus universal high performing sealant made from pure MS polymers. It provides excellent and permanent elasticity at operating temperatures between -40 ° C and + 90 ° C and has high adhesion characteristics on multiple supports. Excellent resistance to UV rays and atmospheric agents, including water, aliphatic solvents, mineral oils, greases, acids and low basis inorganic concentration. NAISIL POLIMERO polymerizes rapidly in contact with atmospheric moisture. Non-shrink. It can be coated with polyurethane, epoxy and acrylic products. NAISIL POLIMERO is used in homes, industries, cold industry, carpentry, plumbing, etc. Thanks to its high dilatation and elongation characteristics, it is suitable for sealing joints and for making corner fillets between wall and floor or wall and wall. Adheres perfectly on cement supports, brick, steel, galvanized sheet, glass, ceramic, wood, plasterboard, metal, polycarbonate, rigid PVC, methacrylate, ABS, polyester resins, also used to glue sanitary ware even in humid places. -
Resin Finish coating with micro fibres, applied by roller or brush, with reflective index (SRI) 109. For protection from UV rays and heat. Waterproofing system for all building surfaces in general. -
Fiber-reinforced waterproofing liquid resin to be activated with Portland cement, resistant to traffic and can withstand direct bonding of tiles ( ideal for pools and pool areas, ponds, terraces, balconies, foundations and outside areas in general) -
NAI CM RASANTE ULTRA is a fibre-reinforced pre-mixed cement plaster for interior and exterior use NAI CM RASANTE ULTRA is shrinkage compensated fibre-reinforced cement able to smooth both new and old structures, with surface irregularities of up to 1cm depth, allowing application thicknesses ranging from 1 mm to 30 mm with one coat and without the formation of cracks. It can also withstand weathering. Support: lime-cement plasters - concrete - plaster (after the application with Nairetan P Solid), consolidated old mineral and synthetic coatings. -
Smoothing white cement for internal and external finishes NAI CM RASANTE ZERO is a premixed white cement, extra-fine grained (<0.1 mm) and breathable. It is indicated for an extremely smooth surface on interior and exterior walls or where it is required; ideal to be coated with paint, resins or wallpaper. Its breathable properties permit application on dehumidifying treatments such as NAI CM SANAMURO and to be subsequently covered with breathable paints. -
Instant waterproofing mortar. NAI CM OSMORAPID is a cement compound powder, fast setting, designed for the immediate stoppage of water infiltrations, even from the outside (counterforce), and for the closure of cracks. The best product for interior interventions and when there are no other solutions (ex. basement walls, foundation walls, galleries, tunnels, basements, elevator shafts, etc.) and for waterproofing of structures subject to leakages (tanks, reservoirs, canals, pipelines, tanks, swimming pools, etc.) -
Solvent-free transparent epoxy resin NAI 60 is a solvent-free epoxy anchoring primer for absorbent surfaces, with verification effect and high penetration properties. It is used as an adhesive on normal and absorbent building surfaces, prior to epoxy or polyurethane applications. Also, perfect for resin art applications -
Solvent-free transparent epoxy resin The ideal as a base for subsequent epoxy or polyurethane coatings. The surface obtained with NAIRETAN BASE possesses high mechanical strength, allowing easy traffic even to heavy vehicles. Also, perfect for resin art applications. -
Water dispersion polymer for sand and cement mortars to increase resistance to compression and movements. Also, can be used as an anchoring agent. -
LATTICEM is an emulsion of synthetic resins that bestows particular adhesion characteristics to concrete. It is used in all applications of cement to impart good elasticity, adhesion, frost resistance and waterproofing. -
Protective anti-corrosion treatment for reinforcement rods NAI CM PRO-FERRO is a premixed mono-component powder, easy to prepare and process. It is used as anti-corrosion treatment for reinforcement rods and as an adhesion promoter between the old concrete screeds and restoring mortars type NAI CM RIPRISTINO (normal setting). NAI CM PRO-FERRO has passive and anti-carbonation properties that provide total CO2 and SO2 protection, thus preventing the formation of rust. -
Rust converter NAIRUST converts rust into an inert compound, integrating it into resin with high anchoring characteristics, thus forming a protective layer for subsequent paint coverings. NAIRUST performs its actions by penetrating in the iron oxide particles transforming them after they react chemically. NAIRUST becomes an indispensable product in the maintenance of oxidized parts (given the high cost of labour), because you can obtain excellent results in terms of duration, and by reducing by at least three times the normal cost of removing rust. NAIRUST can also be used on fences, silos, metal structures of warehouses, trucks or cars and other corrosive structures.
WE ARE QUALITY
