Water-based thixotropic joints sealer (vertical and horizontal)
NAICO GIUNTI is a mixture of elasticized polymer resins emulsion combined with specially selected pigments, producing an elastomeric paste that waterproofs and maintains elasticity and holds over cement surfaces.
The Fibreglass MATT 225" is special reinforcement for liquid resin membranes that can be used on vertical and horizontal surfaces
This net bestows strength, flexibility and elasticity making the covered surface resistant to heavy traffic.
Water repellent-Oleo treatment for natural stone
NAISTONE is a product designed for the treatment of all stone surfaces (limestone, sandstone, golden stone etc), bestowing a natural effect and rendering the surfaces water and oil repellent. It is also a strengthening agent for plasters, fillers, joints and sandstone.
Wet look effect waterproof consolidator for
NAISTONE LUX is the ideal treatment to waterproof, strengthen and embellish natural stone surfaces (lava stone, tuff, sandstone, golden stone, Carparo, limestone, marble, travertine and natural stones in general), leaving the rendered areas water and oil repellent, with a nice wet look effect. Also ideal for protecting plaster, stucco and drains.
Water repellent agent for vertical surfaces
HYDROBLOC is a transparent polysiloxane-based product that protects surfaces from moisture, rain and weather effects,
HYDROBLOC does not form a layer, it’s evanescent components penetrate inside the support forming a protective shield against the elements, it is also recommended on highly absorbent surfaces.
NAIRUST converts rust into an inert compound, integrating it into resin with high anchoring characteristics, thus forming a protective layer for subsequent paint coverings. NAIRUST performs its actions by penetrating in the iron oxide particles transforming them after they react chemically.
NAIRUST becomes an indispensable product in the maintenance of oxidized parts (given the high cost of labour), because you can obtain excellent results in terms of duration, and by reducing by at least three times the normal cost of removing rust. NAIRUST can also be used on fences, silos, metal structures of warehouses, trucks or cars and other corrosive structures.
Protective anti-corrosion treatment for reinforcement rods
NAI CM PRO-FERRO is a premixed mono-component powder, easy to prepare and process. It is used as anti-corrosion treatment for reinforcement rods and as an adhesion promoter between the old concrete screeds and restoring mortars type NAI CM RIPRISTINO (normal setting).
NAI CM PRO-FERRO has passive and anti-carbonation properties that provide total CO2 and SO2 protection, thus preventing the formation of rust.
LATTICEM is an emulsion of synthetic resins that bestows particular adhesion characteristics to concrete. It is used in all applications of cement to impart good elasticity, adhesion, frost resistance and waterproofing.
Solvent-free transparent epoxy resin
The ideal as a base for subsequent epoxy or polyurethane coatings.
The surface obtained with NAIRETAN BASE possesses high mechanical strength, allowing easy traffic even to heavy vehicles. Also, perfect for resin art applications.
Solvent-free transparent epoxy resin
NAI 60 is a solvent-free epoxy anchoring primer for absorbent surfaces, with verification effect and high penetration properties. It is used as an adhesive on normal and absorbent building surfaces, prior to epoxy or polyurethane applications. Also, perfect for resin art applications
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.